Paint Restorer
Paint Restorer
Couldn't load pickup availability
Introducing auto Paint Restorer, the revolutionary self-leveling protective coating designed to restore shine to faded paint, headlights, plastic trims and repairs clear coat scratches and swirls. With its exceptional gloss, hardness, and corrosion resistance, auto Paint Restorer not only enhances your car's shine but also provides lasting protection. It's remarkable self-cleaning properties minimize dust buildup, while effectively covering sun damage.
A single application of auto Paint Restorer can last up to five years, rejuvenating old paint by 60-90%. As a cutting-edge development in the auto detailing industry, this advanced formula integrates premium-grade polyester with polytetrafluoroethylene (PTFE), delivering exceptional durability, UV protection, slickness, and long-lasting protection for vehicle surfaces.
Auto Paint Restorer cures to a 5 microns thick solid layer which is about 5x thicker compared to a typical ceramic coating. Paint Restorer fills light scratches and swirls in the clearcoat adding to the total thickness of the existing clearcoat.
Give your car the ultimate makeover and safeguard its beauty—choose our auto Paint Restorer for a brilliant finish that stands the test of time!
Package Contents：Paint Restorer 235ml；Ultra-fine short-pile microfiber towel ×1；Nitrile gloves ×1 pair; Application instructions ×1
APLICATION INSTRUCTIONS:
Applying the Product:
- Shake the bottle thoroughly with the secured.
- Replace the original cap with the clear nozzle provided in the package.
- Dispense the product onto a folded shop towel or a microfiber applicator. Make sure to use enough product to maintain a consistent wet edge throughout the panel. Keep the bottle nearby to reapply if the towel begins to dry.
- Start at the upper corner of the panel, allowing any excess product to flow downward naturally.
- Using light pressure, hold the towel flat and glide it across the surface from edge to edge, overlapping slightly with each stroke. Spread the product evenly across the panel.
- If you miss a spot within the first 2–3 minutes, gently pass through the area again to ensure even coverage. Avoid overworking any section.
- Be mindful of the 2–3 minute working window. Do not revisit areas beyond this time frame.
Important: If a mistake occurs during application, you can remove the coating more easily within the first 15 minutes. Use Wax and Grease Remover to scrub the area during this time. If the coating has cured, removal will require wet sanding, heavy cutting with a rotary tool, or applying
a strong solvent. This product is designed to provide durable, long-lasting protection.
Curing and Maintenance:
Allow the coating to cure for 24 hours. During this period, avoid touching the surface or exposing it to water. Once fully cured, the coating will provide durable protection. You can hand wash the vehicle 48 hours after application. Avoid automatic car wash with brushes specifically after application.
Note: Products are shipped from Ontario, Canada. For international shipments, customers are fully responsible for any applicable shipping fees, import duties, and taxes associated with the delivery.